Zero4U: 4-Port USB Hub for Raspberry Pi Zero
Zero4U: 4-Port USB Hub for Raspberry Pi Zero001003004007001

Zero4U: 4-Port USB Hub for Raspberry Pi Zero (V1.2 only)

5.00 out of 5
(2 customer reviews)

200.00 CZK

(  7.40EUR  /  6.40GBP  /  8.00USD  )

You'll earn 10 UU Points

This is a 4-port USB hub for Raspberry Pi Zero, and it can be mounted to Raspberry Pi Zero back-to-back. The 4 pogo pins on the back will connect the PP1, PP6, PP22 and PP23 testing pads on Raspberry Pi Zero, hence no soldering will be needed.

REMARKS: this version of Zero4U only works with Raspberry Pi Zero V1.2 (first version without camera connector).

SKU: ZERO4U_V1.2. Categories: , . Tags: , , , , , .

Product Description


This version of Zero4U only works with Raspberry Pi Zero V1.2 (the first version without camera connector).

If you need a Zero4U that works with Raspberry Pi Zero V1.3 (with camera connector), please click here.


This is a 4-port USB hub for Raspberry Pi Zero, and it can be mounted to Raspberry Pi Zero back-to-back. After mounting this USB hub to your Raspberry Pi Zero, it immediately has 4 USB ports that could transfer data in USB 2.0 high-speed. The 4 pogo pins on the back will connect the PP1, PP6, PP22 and PP23 testing pads on Raspberry Pi Zero, hence no soldering will be needed.

The USB hub will take power directly from your Raspberry Pi Zero, so you don’t need to power the USB hub separately. However you can use the JST XH2.54 connector on board as the alternative power input port.

The blue LED on board works the power indicator, and will lights up when power is connected.

Each USB port has a dedicated white LED as transaction indicator, and a dedicated electrolytic capacitor to help stabilizing the output voltage.

If you use this USB hub with other types of computer, you can use a USB cable (not included) to connect the mini-USB port on board to the up-stream USB port.

You can also get an Acrylic case for it.

Remarks: if you ever enabled Ethernet Gadget on your Raspberry Pi Zero, you will need to disable it to use Zero4U. You can either comment out the “dtoverlay=dwc2″ in /boot/config.txt, or plug an OTG adapter to the data micro USB port on Raspberry Pi Zero.


User Manual

http://www.uugear.com/doc/Zero4U_UserManual.pdf


 Package Content

Each package of this USB hub contains:

  • 4-port USB hub board x 1
  • plastic spacer x 4
  • M2.5 plastic screw x 4
  • M2.5 plastic nut x 4

 Specifications

Dimension: 65mm x 30mm x 9mm

Weight: 14 g (net weight without any accessory)

Power Mode: Bus-Power / Self-Power

Standards: USB 2.0 and 1.1 compatibility

Working Voltage: 5V DC

Static Current: 1mA

Maximum Output Current: 2A for all ports in self-power mode, 500mA for all ports in bus-power mode

Operating Temperature: 0°C~70°C

Storage Temperature: -20°C~80°C

Humidity: 0~80%RH, no condensing


 Related Videos

The video below is from the review by RasPi.TV:

Additional Information

Weight 0.025 kg
Dimensions 6.5 x 3 x 0.9 cm

2 reviews for Zero4U: 4-Port USB Hub for Raspberry Pi Zero (V1.2 only)

  1. plawrence
    5 out of 5

    :

    Amazing bit of kit, simple to assemble and just works. I have the versions for both the 1.2 and 1.3 versions of the PiZero. Its a must for anyone wanting to use normal size USB devices.

  2. Mike
    5 out of 5

    :

    Delivered promptly. Neat device, easily and securely attached to Pi. Once tested I enclosed it in the acrylic case purchased at same time. Now used to manage my home security camera system, based on Pi 2 x 2. Highly recommended and have recently ordered the 1.3 version to implement a camera system for my granddaughters telescope.
    Enjoy!!

Add a review